Load data for .30 PICRA + .308 | 180gr | Nosler Partition Gold

Recommended Powder(s):

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 180gr \| Nosler Partition Gold
Manufacturer SKU:	52230
Bullet Weight:	180gr \| 11.7g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	<<locked>>
Caliber:	.30 PICRA load data
Case Length (l3):	1.291" \| 32.8mm
Cartridge Length (C.O.L.):	<<locked>>
Seated Depth:	<<locked>>
Shank Seated Depth:	<<locked>>
Case Capacity:	24.2 Grains of Water \| 1.57 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	40611 psi \| 2800 bar
LID:	LID_B4115_C311
Last updated:	2026-01-21

Load data for 44 loads in caliber .30 PICRA with .308 | 180gr | Nosler Partition Gold bullet and 22 powder(s). The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	72%	35868	88%	**15	100%
Accurate 4100	<<locked>>	73%	36201	89%	**04	93%
[Accurate No. 11 FS]*	<<locked>>	82%	35708	88%	**07	86%
Accurate Solo 1250	<<locked>>	62%	36332	89%	**4	100%
Accurate TCM	<<locked>>	63%	36274	89%	**84	98%
Alliant 2400	<<locked>>	69%	35505	87%	**98	95%
Alliant BLUE DOT	<<locked>>	72%	35897	88%	**71	99%
Baschieri & Pellagri 102 Pistol	<<locked>>	75%	36535	90%	**8	100%
Hodgdon H110	<<locked>>	78%	36303	89%	**40	90%
Hodgdon LilGun	<<locked>>	78%	35781	88%	**66	96%
Maxam CSB 1	<<locked>>	64%	36289	89%	**8	100%
Ramshot Enforcer	<<locked>>	70%	36332	89%	**11	96%
ReloadSwiss RS 30	<<locked>>	95%	36419	90%	**63	93%
SNPE Vectan A0	<<locked>>	64%	36347	90%	**24	100%
SNPE Vectan BA6 1/2	<<locked>>	95%	35897	88%	**07	98%
SNPE Vectan BA7 1/2	<<locked>>	67%	36056	89%	**73	100%
[Somchem S265]*	<<locked>>	85%	36376	90%	**88	89%
Vihtavuori 3N38	<<locked>>	68%	35955	89%	**45	100%
Vihtavuori N105	<<locked>>	71%	35505	87%	**58	100%
Vihtavuori N110	<<locked>>	87%	35795	88%	**27	96%
Vihtavuori N350	<<locked>>	63%	36289	89%	**79	100%
[Winchester 296]*	<<locked>>	77%	35694	88%	**47	87%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	61%	26571	65%	**7	100%
[Accurate 4100]*	<<locked>>	61%	24265	60%	**27	86%
[Accurate No. 11 FS]*	<<locked>>	72%	26556	65%	**79	80%
Accurate Solo 1250	<<locked>>	61%	34998	86%	**8	100%
Accurate TCM	<<locked>>	61%	34316	85%	**61	98%
Alliant 2400	<<locked>>	61%	27456	68%	**76	91%
Alliant BLUE DOT	<<locked>>	61%	26789	66%	**43	97%
Baschieri & Pellagri 102 Pistol	<<locked>>	70%	32706	81%	**8	100%
[Hodgdon H110]*	<<locked>>	61%	21379	53%	**4	80%
[Hodgdon LilGun]*	<<locked>>	61%	19972	49%	**04	86%
Maxam CSB 1	<<locked>>	61%	33562	83%	**8	100%
Ramshot Enforcer	<<locked>>	61%	27340	67%	**89	93%
[ReloadSwiss RS 30]*	<<locked>>	72%	20131	50%	**4	80%
SNPE Vectan A0	<<locked>>	61%	33591	83%	**4	100%
[SNPE Vectan BA6 1/2]*	<<locked>>	69%	18260	45%	**9	88%
SNPE Vectan BA7 1/2	<<locked>>	61%	31270	77%	**24	100%
[Somchem S265]*	<<locked>>	68%	22887	56%	**4	80%
Vihtavuori 3N38	<<locked>>	61%	29008	71%	**63	100%
Vihtavuori N105	<<locked>>	61%	26194	65%	**43	100%
[Vihtavuori N110]*	<<locked>>	62%	17869	44%	**9	84%
Vihtavuori N350	<<locked>>	60%	33591	83%	**47	100%
[Winchester 296]*	<<locked>>	67%	26353	65%	**02	80%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data